Express security machine related to the operation of the guide and its role in the express security screening

Security check is everyone in and out of the subway station train station airports and other public transportation will be carried out when the necessary inspection process. Today I want to talk to you is not our people's security checks but the courier security checks. Express security checks rely on a device, it is the express security machine. The following small make-up will give you the importance of the courier security machine and operating instructions. The following is an introduction to the “courier security check machine related operating guidelines and its role in the courier security check”.

Courier security machine operators need to know the knowledge of

First, the courier security machine operators need to know the following knowledge:

(1) selected full-time courier security machine operators, professional training.

(2) security check machine before power operation, should first check whether the power supply is normal, the monitor, keyboard, cable damage, whether the machine is placed on a smooth and so on. The lead curtains at the entrance and exit of the channel are intact. Check that all shells of the machine have been covered, check whether the equipment's power socket is reliably grounded.

(3) After powering on the machine, check whether the conveyor belt is functioning normally and whether there are spikes and stains that jeopardize the inspected baggage.

(4) Equipment that produces X-rays are harmful and must be taken seriously. When the X-ray light is on, no part of the body can enter inside the security check channel.

(5) Any debugging and maintenance of the security screening machine must be operated by professional technicians, and no private modification or addition of any attachment is allowed without permission.

(6) Do not stand or sit on the conveyor belt when it is running, and please do not touch the edge of the conveyor belt and the rollers at both ends with your hands. When the conveyor belt doesn't go or stops when it goes, you should check the roller and conveyor belt immediately to see if they are slipping or jammed, otherwise the motorized pulley will be burned.

(7) Please use the labeled voltage of the machine, in order to prevent leakage of electricity, please connect the leakage protector before connecting to the power supply.

(8) The operating table and the machine is prohibited to place water cups and food, liquid infiltration of the machine will cause a short circuit.

(9) when the use of security machines should be used when the ambient temperature is lower than 5 degrees Celsius 30 minutes in advance to start warming up, baggage through the luggage should be removed before the water stains on the baggage.

(10) express security check machine long time not in use, should be moved to a dry and ventilated place to save, and the interval of about 15 days to power operation.